Hopp til innhold

Norsk nettbutikk | Rask levering | Frakt i hele Norge

Bensinpumper

 
E85 Compatible In Tank Fuel Pump 450 LPH

1.617,-

Introducing our new 450 LPH In-Tank Fuel Pump. This pump is compatible with pump gas /E85 Fuel. Max pressure output is 130 PSI.  Does not have internal check valve * 20 AMP Fuse Recommended  * 18 Gauge Wire Recommended
E85 Compatible In Tank Fuel Pump 535 LPH

2.048,-

  Introducing our new 535 LPH In-Tank Fuel Pump. This pump is compatible with pump gas and E85 . Max pressure output is 145 PSI.  Has integrated internal check valve * 20 AMP Fuse recommended  * 18 Gauge Wire Recommended
Universal Inline Fuel Pump AN8 outlet, AN10

1.958,-

Description Universal Inline Fuel Pump for EFI systems. Pairs well with our p/n 4651-01-2 mounting bracket. -Rated for up to 900hp @ 70 psi of pressure with gasoline fuel. Flow test report available upon inquiry. -No need to purchase inlet/outlet adapters for fuel pump. They are included with your purchase. The supplied inlet adapter is -10AN male to 18mm x 1.5 male and the outlet adapter is a -08AN male to 12mm x 1.5 male. Outlet fitting has integrated one-way check valve. -Inlet thread of fuel pump is a metric 18mm x 1.5 thread. Outlet thread of fuel pump is a metric 12mm x 1.5 thread Note* This pump is rated for Gasoline fuel only. If used with alcohol based fuels (like e85/methanol) or diesel, pump will have a shorter life and fail prematurely. Pump should be installed as close to your fuel tank/cell as possible. Also needs to be level or below fuel tank/cell so fuel can be gravity fed into inlet of pump. Failure to properly mount fuel pump can cause premature failure and decreased performance. FUEL FILTER RECOMMENDATIONS: -100 micron pre filter (inlet side) <--- this protects fuel pump from larger contaminants from damaging pump -10 micron post filter (outlet side) <--- this protects down-stream fuel injectors that from clogging with debris  
  • vipps-orange.png
  • klarna-dark.png